3 Channel MPX detector with LCD

21.835,00 kr ex moms

Forventet leveringstid: ca. 2 uker

MPN: 3CH-MPX-DET

Produktnummer: TV3CH-MPX-DET Kategorier: , , Stikkord:

Beskrivelse

The MPX3LCD  is a detector that is designed to monitor up to 3 MPX signals and switch one of them to the output. The input that is active, i.e. the input that is switched to the output, is also shown at the display, and its audio signal can be listened to at the headphone jack.

On a failure of the main input, one of the other two sources will be switched to the output. The display of the device will indicate this with the text BACKUP: MPX1, MPX 2 or MPX3. This status is also shown in the HTML interface.

The MPX signals are switched through relays, so that there is zero influence on the signal.

On a detected silence, the priority of inputs that is switched to, is on the order of the lowest input number. For example, if inputs 2 and 3 are both present, then input 2 will always be connected to the output. With inputs 1 and 2, it is always input 1.

The status reports of this are done by means of emails and SNMP. All the settings can be made in the 4 HTML pages. These can be configured with a web browser (Firefox, Google chrome, etc.)

The detector also checks the 19 kHz signal. This is also shown in the HTML interface. You can choose whether the detection takes place by audio silence or the absence of the 19 kHz signal.

Preferable, use input 1 as the Main input. The reason is that on a power failure, the relays switches input 1 to the output.

At the back you can find the connections for the MPX inputs and the network connection.

There is also a 9 pin D connector with the text “Tally”

A relay contact is connected to this, which indicates the status of the detector. Pin 1 = NC Pin 2 = NO Pin 6 = common

SPECIFICATIONSlogo large white.png

HTML5 web interfacelogo large white.png

3 MPX inputslogo large white.png

1 MPX outputlogo large white.png

SNMPlogo large white.png

Mail serverlogo large white.png

Attack time, release time, treshold, left/right, detector (audio level, 19kHz)logo large white.png

Tally controllogo large white.png

LCD display

Jack 6,3mm headphone output

Brand

AeroAudio

Les mer om AeroAudio

AeroAudio

AeroAudio designar och tillverkar radiolösningar av hög kvalitet. Målet är att designa och skapa de mest effektiva och användarvänliga produkterna som löser den problematiken med 'hur ansluter jag', 'hur styr jag' eller 'varför går den sönder igen', som tekniker och användare möter i vardagen. AeroAudio har produkter som förstärkare, switchar och bluetooth-sändare för mikrofoner och hörlurar.